Download Print this page

Reflashing The Radio - Metra Electronics Saddle Tramp BC-DSPX-HD2 Installation Instructions Manual

Hide thumbs Also See for Saddle Tramp BC-DSPX-HD2:

Advertisement

BC-DSPL-HD2
• Reflashes the OE radio curve to a flat response
• Water Tight Saddle Tramp Case
• 31 Band graphic equalizer or 5 Band parametric EQ per channel
• Pre-wired for quick installation when retaining the OE radio
• BC-9715 harness with pre-wired inputs and outputs
• Independent equalization for all outputs
• Independent crossover for all outputs
• Selectable slope (12, 24, 36, or 48db per octave)
• Signal Delay
®
• Settings adjusted via Bluetooth
in a smart device application (tablet or mobile phone),
compatible with both Android™ and Apple
• Read, write, and store configurations for future recall
• Password protect feature available in the mobile app
• Micro-B USB updatable
Reflashing the OE Radio
Stock non-amplified Harley Davidson's radios use pre-programmed crossover and equalization
settings that are locked into the OE radio. These setting can't be adjusted without reflashing your
OE radio. Within the Vehicle Selection page of the AX-DSP-XL app you can reflash your OE radio
to output a flat frequency response curve.
4
REFLASHING THE OE RADIO
®
devices
BC-9715 Harness
• Add an amp harness 2014-up HD with OE radio and fairing
• Provides pre-terminated input and output wires
• RCA output harnesses included
• Pre-wired rear speaker output, used with BC-9720 backbone harness (sold separately)
• Universal for all amps
• Wire covered in protective cloth tape
IMPORTANT:
This product is not a reflash
tool. The BC-DSP interface stores the OE
radio's serial number and locks to the
motorcycle vehicle identification number
(VIN) during the programming process.
To move the DSP interface to a different
motorcycle, you must return the original
radio to the OE curve before uninstalling.
This process can be repeated a total of
(3) times before the DSP will no longer
function. Both the Serial number and VIN
numbers are stored in the DSP and cannot
be removed or reprogrammed, except
by the manufacturer. Each DSP that is
returned will be decoded and evaluated.
If Metra suspects inappropriate use, a
credit will not be issued.
|
386.257.1187
MetraOnline.com

Advertisement

loading