Dbs Menu Function - GE RM94906 Instruction Manual

94906 Revised Size 1/21/02

DBS Menu Function

The DBS Menu is used to navigate thru the
Guide screens, to make changes in the DBS set-
tings such as channel lists, passwords, etc.
Entering the DBS Menu Mode:
1. Push the CBL•SAT
button on the remote.
2. Push the MENU button.
This puts the remote in
DBS Menu Mode. The
DBS Menu should now
be visible on the
television. The
INDICATOR LIGHT will
blink continuously to
indicate the remote is
now in DBS Menu
Mode.
While in DBS MENU
these buttons will
function as follows:
VOL UP/DOWN
buttons will operate as
CURSOR RIGHT/LEFT
CH+/- keys will operate as
CURSOR UP/DOWN.
For RCA, GE, and ProScan DBS Systems, push-
ing the MENU button will select the highlighted
item. The numberic buttons may also be used to
select the MENU choice.
Note: Not all functions in competitive models
and brands of DBS systems may be fully sup-
ported.
2/25/02 4:20 PM
INDICATOR
CBL•SAT
LIGHT
BLINK
12
Page 13