MAINTENANCE
150
Remove the rider seat, see page 85.
▼
1.
Battery tray cover
2.
Negative (black) battery lead
3.
Battery
4.
Battery strap holder hook
5.
Battery strap
6.
Battery strap hook
7.
Positive (red) battery lead
8.
Rear suspension unit lead
Disconnect
▼
battery lead.
Disconnect the positive (red) battery
▼
lead and position away from the
terminal.
Disconnect the rear suspension unit
▼
lead.
1
2 3
4
8
7
6
5
the
negative
(black)
Release the battery strap from the
▼
hook and attach to the battery
strap holder hook.
1.
Battery tray cover
2.
Battery
The battery tray cover is hinged
▼
for easy access. Carefully lift and
tilt the battery tray cover towards
the rear of the motorcycle to gain
access to the battery. Take care not
to stretch, pull or trap any leads.
Remove the battery.
▼
Battery Charging
Caution
Over charging and severe discharging
will damage the lithium-ion battery.
Do not allow the voltage at rest to fall
below 12.4 Volts.
Always
check
that
voltage is limited to the voltage shown
in the Maximum Charge Rate table.
1 2
the
charging