Table of Contents
Advertisement
2. SAFETY RECOMMENDATIONS
This product is placed onto the market as "partly completed machin-
ery", therefore it cannot be commissioned until the machine in which
it will be incorporated has been identified and declared to conform
to the Machinery Directive 2006/42/EC by the actual Manufacturer.
!
Incorrect installation and/or incorrect use of the product might cause
serious harm to people. Read and comply with all the instructions
before starting any activity on the product. Keep these instructions
for future reference.
Perform installation and other activities adhering to the sequences
provided in the instructions manual.
Always comply with all the requirements contained in the instructions
and warning tables at the beginning of the paragraphs.
comply with the safety recommendations.
Only the installer and/or maintenance technician is authorised to
work on the automation components. Do not modify the original
components in any way.
Close off the work site (even temporarily) and prevent access/tran-
sit. EC countries must comply with the legislation that transposes
the European Construction Site Directive 92/57/EC.
The installer is responsible for the installation/testing of the automa-
tion and for completing the Register of the system.
The installer must prove or declare to possess technical and profes-
sional proficiency to perform installation, testing and maintenance
activities according to the requirements in these instructions.
2.1 INSTALLER SAFETY
Installation activities require special work conditions to reduce to the
minimum the risks of accidents and serious damage. Furthermore,
the suitable precautions must be taken to prevent risks of injury to
persons or damage.
!
The installer must be in good physical and mental condition, aware
of and responsible for the hazards that may be generated when using
the product.
The work area must be kept tidy and must not be left unattended.
Do not wear clothes or accessories (scarves, bracelets, etc.) that may
get caught in moving parts.
Always wear the personal protective equipment recommended for the
type of activity to be carried out.
The required level of workplace lighting must be equal to at least
200 lux.
Operate CE marked machinery and equipment in compliance with
the manufacturer's instructions.
conditions.
Use the transport and lifting equipment recommended in the instruc-
tions manual.
Use safety-compliant portable ladders of adequate size, fitted with
anti-slip devices at the top and bottom, equipped with retainer hooks.
2.2 TRANSPORT AND STORAGE
4 Symbols: warnings on packaging.
Read the instructions.
Handle with care. Fragile parts.
BLIZZARD 500-900
Always
Use work instruments in good
5
Up indication.
Keep away from water and moisture.
3
Maximum number of stacked packages.
CE marking.
SUPPLY ON PALLETS
RISKS
PERSONAL PROTECTIVE EQUIPMENT
!
SINGLE PACKAGE
RISKS
PERSONAL PROTECTIVE EQUIPMENT
!
STORAGE
Store the product in its original packaging, in closed and dry premises,
protected from the sun and free from dust and aggressive substances.
Protect from mechanical stress. If stored for more than 3 months,
regularly check the condition of the components and the packaging.
- Storage temperature: 5°C to 30°C.
- Percentage of humidity: 30% to 70%.
Follow the instructions on the packag-
ing during handling.
Use a forklift or pallet truck, following
safety regulations to avoid the risk of
impacts or collisions.
Follow the instructions on the packag-
ing during handling.
532102 - Rev.B
Advertisement
Table of Contents
