Furuno FM-8800D/8800S Installation Manual page 3

SAFETY INSTRUCTIONS
WARNING
Hazardous voltage.
Can shock, burn or cause
serious injury.
Do not work inside the equip-
ment unless totally familiar
with electrical circuits.
Do not approach the antenna
closer than 0.9 m (MPE by
FCC) when it is transmitting.
The antenna emits radio waves
which can be harmful to the
human body.
RF power density
on antenna aperture
2
100 W/m
FM-8800S 2
10 W/m
2
2 W/m
2
100 W/m
2
FM-8800D 10 W/m
2
2 W/m
(MPE: Minimum Permissible Exposure)
Turn off the power at the mains switch-
board before beginning the installation.
Post a warning sign near the switch-
board to indicate that power should not
be applied while the equipment is being
installed.
Electrical shock, serious injury or fire can
result if the power is not turned off or is
applied while the equipment is being
installed.
Description
Distance
required by
0.11 m
IEC 60945
0.33 m
IEC 60945
MPE by FCC
0.9 m
IEC 60945
0.11 m
0.33 m IEC 60945
0.9 m MPE by FCC
CAUTION
Attach securely protective
earth to the ship's body.
The protective earth
(grounding) is required to the
AC/DC power supply unit to
prevent electrical shock.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage.
The voltage rating appears on the label
at the rear of the display unit.
Observe the compass safe distance to
prevent deviation of a magnetic
compass.
Standard
compass
FM-8800S
1.45 m
FM-8800D 1.45 m
IF-8810 0.85 m
IF-8820
0.75 m
HS-2003 1.50 m
HS-8800
0.40 m
RB-8800
1.20 m
(W/HS-8800)
RB-8810
1.50 m
(W/HS-8800)
PR-240-CE 0.90 m
Steering
compass
0.90 m
0.95 m
0.55 m
0.50 m
0.95 m
0.30 m
0.80 m
1.00 m
0.60 m
i