Furuno FM-8800D/8800S Installation Manual page 32

8. For the console w/printer, connect the printer cable for data transmission to the
PRINTER port of the Transceiver Unit and fix the power cable to the terminal board as
before. Then, fix the printer assembly to the console. For no printer, fasten the
concealing lid to the console.
9. Fasten the cover assembly.
NOTE: If the console assembly is to be mounted on the hull, refer to paragraghs 1-9 and
2-10.
3-4
Grommets 2 places
View
Junction box
Printer
Printer cable
J2
Insert the mounting plate
for printer to the catch of the console
W/ Printer