Table of Contents
Advertisement
Caliper service is only required if the pistons are damaged or if the system has been contaminated with DOT 5 or mineral oil.
If the calipers are operating normally, they do not require disassembly and service. Clean the calipers and install brake pads.
C a l i p e r P i s t o n R e m o v a l
DOT brake fluid will damage painted surfaces. If any fluid comes in contact with a painted surface (i.e. your frame) or printing on the brakes, wipe
it off immediately and clean it with isopropyl alcohol or water. Damage to painted and/or printed surfaces by DOT brake fluid is not covered under
warranty.
1
Insert two brake rotors into the caliper and into the rotor slot.
2
Squeeze the brake lever to advance the pistons until they contact the
rotors.
Remove the rotors.
3
Install the pad retention bolt.
Insert the pad spacer so that it snaps onto the pad retention bolt.
N OT ICE
N OT ICE
2.5 mm
2.4 mm pad spacer
20 mm or 15 mm Thru Axle
Caliper Piston Removal
12
Advertisement
Table of Contents
