Table of Contents
Advertisement
C a l i p e r S e r v i c e
P a r t s a n d T o o l s N e e d e d f o r S e r v i c e
Parts
• SRAM Guide / G2 Brake Pad Kit
• Disc Brake Caliper Piston Kit - (Includes 2-16 mm & 2-14 mm Caliper
Pistons, Seals & O-Rings) - Guide R, RS, RSC (A1-B1), G2 RSC/Ultimate
Safety and Protection Supplies
• Safety glasses
• Nitrile gloves
• Oil pan
• Clean, lint-free shop towel
Lubricants and Fluids
• Isopropyl alcohol
• SRAM High-Performance DOT 5.1 brake fluid. If SRAM fluid is not
available, only use DOT 5.1 or 4 brake fluid.
• SRAM or AVID DOT grease. If SRAM or AVID DOT grease is not
available only use a DOT compatible grease.
For piston removal you will need two used brake rotors with a combined total thickness of no more than 3.7 mm.
C a l i p e r E x p l o d e d V i e w
Caliper body bolt
Pad retention bolt
Caliper body bolt
Outboard caliper body
Caliper o-ring
Caliper pistons
Piston seals
Caliper o-ring
Common Tools
• 2.5 mm hex wrench
• Needle nose pliers
• Pick with a 90 degree bent tip
• T25 TORX wrench
• T25 TORX bit socket
• Torque wrench
• Digital caliper
SRAM Tools
• SRAM Brake Bleed Kit (includes Medium, 11 mm Bleed Block
and Bleeding Edge Fitting)
• SRAM Hydraulic Hose Cutter
• Pad Spacer (2.4 mm)
Bleed block (Medium, 11 mm)
Pad Spacer (2.4 mm)
Brake pad
Brake pad
Pad H-Spring
Piston seals
Banjo
bolt
o-rings
Caliper pistons
Bleed port plug
Bleed screw port
Inboard caliper body
Caliper Service
Banjo
bolt
Banjo
E-clip
10
Advertisement
Table of Contents
