General - Sony STR-KS1000P Service Manual

LOCATION OF CONTROLS
Getting Started
Description and location of parts
Receiver
Front panel
1 2 3
?/1
VIDEO 1 VIDEO 2
Name Function
A ?/1
Press to turn the receiver
on or off.
B Display
The current status of the
selected component or a
list of selectable items
appears here.
C Input lamps
The lamp of the chosen
input source lights up.
D Remote sensor
Receives signals from
remote commander.
E INPUT
Press to select the input
SELECTOR source to playback.
F MUTING
Press to mute the sound.
Name Function
K ;PL(II)
Lights up when the receiver
applies Pro Logic processing to 2
channel signals in order to output
the center and surround channel
signals. "; PLII" lights up
when the Pro Logic II Movie/
Music decoder is activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format signals.
L DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and the audio
input mode for VIDEO 2 input
or SA-CD/CD input is not set to
"V2 ANLG" or "CD ANLG".
M SW
Lights up when the audio signal
is output from the
SUBWOOFER jack.
SECTION 1

GENERAL

4 5 6
INPUT SELECTOR MASTER VOLUME
PRESET TUNING SOUND FIELD MUTING
DVD SA-CD/CD TUNER
AUTO CAL MIC
q; 9 8 7
Name Function
G MASTER
Turn to adjust the volume
VOLUME level of all speakers at the
same time.
H AUTO CAL MIC
Connects to the supplied
jack ECM-AC2 optimizer
microphone for the Auto
Calibration function.
I SOUND FIELD
Press to select a sound
+/– field.
J PRESET TUNING
Press to select a preset
+/– station.
This section is extracted from
instruction manual.
About the indicators on the display
1 2 3 4
SLEEP
DIGITAL
L C R
LFE
DTS PL
SW SL S SR
OPT COAX
qd qs qa q; 9
Name Function Name
A E Preset
Lights up when the disc being
LFE
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
F D.RANGE
B SLEEP
Lights up when the sleep timer is
activated.
G Tuner
C Playback
The letters (L, C, R, etc.) indicate
channel the channels being played back.
indicators The boxes around the letters vary
H MEMORY
to show how the receiver
downmixes the source sound.
L
Front Left
R Front Right
I COAX
C
Center (monaural)
SL Surround Left
SR Surround Right J OPT
S Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
L C R
SW SL SR
D ;DIGITAL
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you have
made digital connections and the
audio input mode for VIDEO 2
input or SA-CD/CD input is not
set to "V2 ANLG" or "CD
ANLG".
Rear panel
1 2
ANTENNA
SA-CD/CD VIDEO 2 VIDEO 1
L L
AM
U
R R
– + – + – +
OPT IN OPT IN COAX IN
AUDIO IN AUDIO IN AUDIO IN
SA-CD/CD VIDEO 2 DVD FRONT R FRONT L SUR R
4 3
A ANTENNA section D DIGITAL INPUT section
FM Connects to the
ANTENNA FM wire antenna
supplied with this
receiver.
AM Connects to the
ANTENNA AM loop antenna
supplied with this
receiver.
B AUDIO INPUT section
AUDIO IN Connects to a
White (L)
jack satellite tuner, CD
player, etc.
Red (R)
C SPEAKER section
Connects to speakers.
The following table shows
the respective color for the
speaker jacks.
Speaker jack Color
FRONT R Red
(Front right speaker)
FRONT L White
(Front left speaker)
SUR R Grey
(Surround right speaker)
SUR L Blue
(Surround left speaker)
CENTER Green
(Center speaker)
SUBWOOFER Purple
(Sub woofer)
STR-KS1000P
5 6
D.RANGE
MEMORY RDS
ST MONO
8 7
Function
Lights up when using the
station receiver to tune in radio stations
indicators you have preset. For details on
presetting radio stations.
Lights up when dynamic range
compression is activated.
Lights up when using the
indicators receiver to tune in radio stations,
etc.
Lights up when a memory
function, such as Preset Memory,
etc., is activated.
Lights up when the DVD input is
selected.
Lights up when
– audio input mode for VIDEO 2
input is set to "V2 AUTO" and
the source signal is a digital
signal being input through
VIDEO 2 OPT IN jack.
– audio input mode for SA-CD/
CD input is set to "CD AUTO"
and the source signal is a
digital signal being input
through SA-CD/CD OPT IN
jack.
– audio input mode for VIDEO 2
input or SA-CD/CD input is set
to "V2 OPT" or "CD OPT".
– + – + – +
SUR L CENTER SUBWOOFER
OPTICAL Connects to a DVD
IN jack player, etc. The COAX
IN jack provides a better
quality of loud sound.
COAXIAL
IN jack
3