Cisco Linksys RE1000 Getting Started page 4

RE1000 Range Extener
4. Select the network to use, then click Next.
5. Type your network's passwor, then click OK.
- OR -
If your network is hien (your router oes not broacast its name), click
My network is hidden, enter your network's information, then click OK.
6. Click Next. Your extener is set up, an you are prompte to move the
extener to its final location.
TIP
For best performance, position the extener where the wireless
signal of your router or access point is reliably strong (at least 60%
strength).
Getting Starte
4