Furuno ECDIS FEA-2100 Update Manual page 7

4. Chart Conversion (from ENC format to SENC format)
The chart data in a CD-ROM (ENC format) must be converted to SENC format in order to display
it on the ECDIS. Note that the conversion takes several hours.
[View loaded CD Catalogue]
[Group Select] window
[OK] button
Group name ebtered.
[Load]
[CD] box
[Groups] box
[Chart Selection]
1. Press the [CHART PLAN] key to display the
menu.
2. Place the cursor on [Load] - [View loaded CD
Catalogue] and press the [SELECT] key.
3. Choose the catalogue name from the [CD] box.
4. Place the cursor on the [Groups] button in the
[Chart Selection] window and press the
[SELECT] key.
5. Place the cursor on the catalogue name entered
at the [Group Select] window and press the
[SELECT] key. The chart numbers chosen
above are displayed in black as shown in the left
figure.
7