Table of Contents
Advertisement
Adding Paper Sources
Adding Paper
Sources
4-10
Selecting the Ethernet Interface
The printer's standard interface is parallel. While the Ethernet interface
board is installed, the printer automatically detects that the computer is
using the Ethernet interface.
Ethernet Specifications
The table below shows the physical specifications of the Ethernet
interface.
Specification
The span of 10BASE-2
The span of 10BASE-T
Speed of data transmission
Paper Feeder
If you switch paper sizes frequently, you may want to add a second paper
source. Or you may simply wait to increase the paper capacity of your
printer. You can easily do this by installing an optional paper feeder
which consists of a base frame and a paper tray. The paper tray in the
paper feeder is identified as tray 2 and the one in the basic configuration
is identified as tray 1.
The paper types and sizes used by tray 2 are the same as those for the
standard paper tray. The capacity is 500 sheets of 0.09 mm thick paper,
twice that of the standard paper tray.
Description
Max. 185 meters
(coaxial, bus connection)
Max. 100 meters
(twisted-pair, star connection)
10M bits/second
User's Manual
Advertisement
Table of Contents
