Installing Software - FujiFilm axia ix-10 User Manual

Installing software

Follow these instructions to install the ix-10 Digital Camera drivers and
software on your system.
Note: You may be prompted to insert your Windows Installation
CD-ROM or disk.
Driver Installation
1. At this stage, you do not need to connect your ix-10 Digital
Camera to the PC. To load the software, insert the ix-10 Digital
Camera software CD into your CD-ROM drive. The setup
program should start up automatically. If not, please click the
'setup.exe' icon via the CD icon in My Computer.
2. Follow the on-screen instructions. All the software required
for the camera will be loaded automatically. The software is
loaded in two parts. One half represents the Twain drivers and
Utility software to allow the camera to 'talk' to the computer
via the USB cable.
The second part is a suite of five programs that allow you to
work with your pictures on your computer. The five programs
are Photo Base, Photo Suite 2.2, Photo Fantasy 2.0, Photo
Printer 2.0 and Photo Montage 1.0, and are described in more
detail on page 27. If you need help loading your software,
please call the Fujifilm Technical Hotline.
Note: You should reboot your computer before using the ix-10
Digital Camera and software. Remember that you will need to
connect your camera to the PC with the USB cable before being
able to download pictures.
22