Cleaning Modes; Z-Pattern Mode - Philips FC8820 Manual

2 Unless you press one of the mode buttons, the robot continues
cleaning modes, see section 'Cleaning modes'.
3
4 You can also press the on/off button to interrupt or stop the
cleaning run. If you press the on/off button again and there is still
enough energy in the rechargeable battery, the robot continues
cleaning in the auto cleaning mode.
5 You can also make the robot return to the docking station before
on the display of the robot lights up and the robot returns to the
docking station.
Note: If you did not start the robot from the docking station, it does not return
to the docking station automatically when the rechargeable battery runs
low. If there is still enough energy in the rechargeable battery, you can press
the docking button to make the robot return to the docking station. If the
rechargeable battery is completely empty, you have to place the robot on the
docking station manually.

Cleaning modes

modes that can each be activated by pressing the appropriate button.

Z-pattern mode

-
through the room to clean large areas.
ENGLISH
13