Table of Contents
Advertisement
ENGLISH
10
4
Place the rechargeable battery into the battery cavity.
Note: Make sure that the print on the battery points upwards and that the
connectors point in the right direction.
5
Slide the battery cavity cover back onto the robot.
Removing the protection tag from the remote control
The remote control works on a CR2025 coin-shaped battery. This battery
is protected with a protection tag that has to be removed before use.
1
Pull the battery protection tag out of the battery compartment of
the remote control.
,
Preparing for use
Installing the docking station
1
Insert the small plug of the adapter into the socket on the docking
of the docking station lights up.
2
fasten it to the wall with screws or with two strips of double-sided tape.
Note: Make sure that there are no obstacles or height differences 80cm in
front, 30 cm to the right and 100cm to the left of the docking station.
Charging
Your robot can be charged in two ways:
Advertisement
Table of Contents
