Using Your Homerun; Starting And Stopping; Cleaning Modes - Philips HomeRun FC9910 User Manual

6 Using your
HomeRun

6.1 Starting and stopping

Press the POWER button. The display of the
1
robot goes on.
Press the start/pause button to start cleaning.
2
The start/pause indication flashes on the
3
display and the cleaning time starts to count
up from 0 (1) while the homeRun starts
cleaning (2).
16
1
if you want to pause for a moment, press the
4
start/pause button. The start/pause indication
lights up continuously. Press the start/pause
button again to resume cleaning.
Press the POWER button to stop cleaning.
5
The robot stops cleaning but stays in
operational mode. Press the POWER
button again to make the robot enter standby
mode. The display goes off.

6.2 Cleaning modes

Your homeRun has four cleaning modes. Each
mode is designed for a particular situation.
To change the cleaning mode, press the
1
MODE button.
2
The cleaning indication of the selected mode
2
lights up on the display.
Press the start/pause button to start cleaning.
3