Adjusting The Light Source Brightness; Turning On Automatic Luminance Adjustment - Epson EH-LS12000B User Manual

Adjusting the Image Quality

Adjusting the Light Source Brightness

You can adjust the brightness of your projector's light source.
a Turn on the projector and switch to the image source you want to use.
b
Press the [Light Output] button on the remote control.
c Use the left and right arrow buttons to select the brightness.
d Press [Menu] or [Esc] to exit the menus.
You can also set the Light Output setting in the projector's Image
menu.
a

Turning On Automatic Luminance Adjustment

You can turn on Dynamic Contrast to automatically optimize the image
luminance. This improves the image contrast based on the brightness of the
content you project.
a Turn on the projector and switch to the image source you want to use.
b Press the [Menu] button on the control panel or remote control.
c Select the Image menu and press [Enter].
d Select Dynamic Contrast and press [Enter].
e Choose one of the following options and press [Enter]:
• Normal for standard brightness adjustment.
51