Stanley IW16 Safety, Operation & Maintenance

Stanley IW16 Safety, Operation & Maintenance

Hydraulic impact wrench
Hide thumbs Also See for IW16:

Advertisement

Quick Links

Infrastructure
Safety, Operation & Maintenance
IW16 Hydraulic Impact Wrench
20224 Service Manual 2/2019 Ver. 31
DECLARATION OF CONFORMITY
ÜBEREINSTIMMUNGS-ERKLARUNG
DECLARATION DE CONFORMITE CEE
DECLARACION DE CONFORMIDAD
DICHIARAZIONE DI CONFORMITA
______________________________________________________________________
I, the undersigned:
Ich, der Unterzeichnende:
Je soussigné:
El abajo firmante:
lo sottoscritto:
hereby declare that the equipment specified hereunder:
bestätige hiermit, daß erklaren Produkt genannten Werk oder Gerät:
déclare que l'équipement visé ci-dessous:
Por la presente declaro que el equipo se especifica a
Dichiaro che le apparecchiature specificate di seguito:
1.
Category:
Kategorie:
Catégorie:
Categoria:
Categoria:
2.
Make/Marke/Marque/Marca/Marca
3.
Type/Typ/Type/Tipo/Tipo:
4.
Serial number of equipment:
Seriennummer des Geräts:
Numéro de série de l'équipement:
Numero de serie del equipo:
Matricola dell´attrezzatura:
Has been manufactured in conformity with
Wurde hergestellt in Übereinstimmung mit
Est fabriqué conformément
Ha sido fabricado de acuerdo con
E' stata costruita in conformitá con
Directive/Standards
Richtlinie/Standards
Directives/Normes
Directriz/Los Normas
Direttiva/Norme
EN ISO
EN ISO
EN ISO
EN ISO
EN ISO
Machinery Directive
5.
Special Provisions:
Spezielle Bestimmungen:
Dispositions particulières:
Provisiones especiales:
Disposizioni speciali:
6.
Representative in the Union: Patrick Vervier, Stanley Dubuis 17-19, rue Jules Berthonneau-BP 3406 41034 Blois Cedex, France.
Vertreter in der Union/Représentant dans l'union/Representante en la Union/Rappresentante presso l'Unione
Done at/Ort/Fait à/Dado en/Fatto a STANLEY Infrastructure, Milwaukie, Oregon USA
Signature/Unterschrift/Signature/Firma/Firma
Position/Position/Fonction/Cargo/Posizione
Nuerenberg, David
Surname and First names/Familiennname und Vornamen/Nom et prénom/Nombre y apellido/Cognome e nome
continuación:
Hydraulic Hand-Held Impact Wrench
STANLEY
IW16150, IW16150S, IW16350
ALL MODELS NOTED ABOVE FROM
SERIAL NUMBER (042312097) and Above
No.
Approved body
Nr
Prüfung durch
Numéro
Organisme agréé
No
Aprobado
n.
Collaudato
28927-9
Self
3744 (15744)
Self
11148-69, Cl. 5.4
Self
11148-6, Cl. 5.5
Self
13732-1
Self
2006/42/EC:2006
Self
None
North America Quality Manager
Date/Datum/le/Fecha/Data
4/25/2018

Advertisement

Table of Contents
loading

Summary of Contents for Stanley IW16

  • Page 1 Provisiones especiales: Disposizioni speciali: Representative in the Union: Patrick Vervier, Stanley Dubuis 17-19, rue Jules Berthonneau-BP 3406 41034 Blois Cedex, France. Vertreter in der Union/Représentant dans l’union/Representante en la Union/Rappresentante presso l’Unione Done at/Ort/Fait à/Dado en/Fatto a STANLEY Infrastructure, Milwaukie, Oregon USA...
  • Page 2: Safety Precautions

    Repair and service of this tool must only be performed by an authorized and certified dealer. Indicates a potentially hazardous situation which • Use only replacement parts recommended by STANLEY. could result in property damage. • Do not force the tool to do the work of a larger tool. Use the correct tool for your application.
  • Page 3 Holds the socket or accessory. Impact Mechanism Creates the impact force that is translated through the square drive / anvil to the fastener. Rotation Direction Lever Allows the user to change the rotation direction of the tool. IW16 Service Manual | 3...
  • Page 4 Impact Mechanism Assembly (Not Shown) Model 24757 IW16350 - Includes 72770, 21011, 24678, 24680, 08148 Thrust Bearing 24679, 24677 & 01276* 24677 Hammer 09602 Seal Kit (Not shown) - * in seal kit 09612 General Caution Decal 4 | IW16 Service Manual...
  • Page 5 08123, 08126 & 08146) 21986 Cap Screw 00255 O-ring* 09602 Seal Kit (Not shown) - * in seal kit 08146 Bushing 08136 Main Shaft 07337 Dowel Pin 00697 Lock Washer 09284 Cap Screw 00717 O-ring* IW16 Service Manual | 5...
  • Page 6 10 11 IW16 Valve Spool & Trigger Illustration IW16 Valve Spool & Trigger Illustration ITEM DESCRIPTION ITEM DESCRIPTION 08133 Trigger 03971 Coupler Set (Not shown) - Includes 03973 & 03972 05965 Roll Pin 81160 Coupler Set (Not shown) - Model IW16150BN...
  • Page 7 Valve Handle Assembly (Includes 350237, 07337 & 73167 08146) 08015 Backup Ring* 01211 O-ring* 00580 Set Screw 04939 Lever 08139 Reversing Spool 350237 Hollow Hex Plug 09602 Seal Kit (Not shown) - * in seal kit IW16 Service Manual | 7...
  • Page 8: Specifications

    Values determined according to noise test code given in ISO 15744, 11203 and 3744. Declared vibration emission value in accordance with EN ISO 28927-2. Declared Vibration Emission Value 62.2 m/sec² (Main Handle): Declared Vibration Emission Value 40 m/sec² (Assist Handle): Uncertainty 13.4 m/sec² 8 | IW16 Service Manual...
  • Page 9: Troubleshooting

    See “Grease the Impact Mechanism” on page Impact mechanism needs to be lubricated. Impact mechanism is worn or damaged. Contact your STANLEY dealer for service. Ensure the power source is delivering proper flow and pressure. See “Specifications” on page 8.
  • Page 10: Tool Disassembly

    Remove the eight cap screws holding the hydraulic motor to the handle assembly. Note: During reassembly, apply Loctite 242 to each screw thread. Install each cap screw finger tight. Torque each screw to 55 Ft. Lbs., in the pattern shown. 10 | IW16 Service Manual...
  • Page 11 Note: Count how many turns you made when taking out the relief adjustment screw. Reassemble with the same amount of turns to maintain proper impact force. To adjust the impact force, see “Adjusting Impact Intensity” on page 14. Replace exposed seals during reassembly. IW16 Service Manual | 11...
  • Page 12 Remove the spring cap, headed push pin, valve spool, relief seat, poppet, springs and spring rest from the handle. Replace exposed seals during reassembly. Note: During reassembly, ensure that seals 22064, 06533 and 00026 are in their proper position inside the spool cap, as shown in the seal orientation graphic below. 12 | IW16 Service Manual...
  • Page 13 A Note About Older Model Valve Spools IW16’s with a serial number of 031513001 or earlier use an older version valve spool and handle. New model valve spools are not backwards compatible. You must order a new handle assembly (Part Number 73167) and a new valve spool, if replacement is necessary.
  • Page 14 Connect the tool to the hydraulic power supply. Power up the hydraulic power supply. Use IW16 to tighten a fastener. Watch the flow and pressure gauge and ensure maximum flow and pressure are not exceeded. See “Specifications” on page 8.
  • Page 15: Tool Maintenance

    Mechanism” on page 14. Inspect tool to ensure all decals are legible. Contact STANLEY if replacements are needed. Using a calibrated flow and pressure gauge, check the output of the hydraulic power source. Ensure it matches the flow and pressure in “Specifications”...
  • Page 16 STANLEY Infrastructure 6430 SE Lake Road, Portland, Oregon 97222 USA (503) 659-5660 / Fax (503) 652-1780 www.stanleyinfrastructure.com...

This manual is also suitable for:

Iw16150Iw16150sIw16350

Table of Contents