Panasonic KX-TGF350N Service Manual page 46

KX-TGF350N/KX-TGF352N/KX-TGF353N/KX-TG572SK/KX-TGF380M/KX-TGF382M/KX-TGF383M/KX-TGFA30N/KX-TGFA30M
Case1: OK
AC power on
PIO01
0.05s
1.5s
Case2: NG1(fail to reset BT_IC)
AC power on
PIO01
1.5s
Case3: NG2 (fail to receive of UART signals)
AC power on
PIO01
1.5s
Case4: NG3 (fail to transmit of UART signals)
AC power on
PIO01
1.5s
Cross Reference:
Schematic Diagram (BT module) (for KX-TGF380 only) (P.80)
Note:
(*2) After replacing, need to adjust the frequency of BT.
Refer to Things to Do after Replacing X'tal (P.63)
1.95s
If BT_IC does not work, 1st and 2nd signals does not
appear.
If BT_IC fails to receive of UART, 2nd signal does not turn
to HIGH.
If BT_IC fails to transmit of UART, 2nd signal does not turn
to LOW.
s
46
Check the circuit of around
POWER and RESET parts
of BT Module.
Check the circuit of around
UART communication (*1) of
main board and BT module.
still NG
Replace BT module (*2)