Setting Cue Points; Setting A Cue Point On-The-Fly - Fostex FR-2 Owner's Manual

FR-2 Field Memory Recorder (Chapter 5: Recording/playback)
The FR-2 can store cue points, which can be used as markers. You can manually set and
store a cue point at the desired position during recording (or while stopped).
<About MARK 00 and MARK E>
When you finishes audio recording, the FR-2 automatically set "MARK00" and "MARK E" at the
beginning and end points of the recording, respectively. These points correspond to "ABS 0"
and "REC END" points, to which you can locate or skip. Note that, unlike other cue points you
store at desired positions, you cannot delete these points, as well as edit point data and names.

Setting a cue point on-the-fly

You can set a "cue point" at the position you press the [MARK CUE] key during
recording/playback or while stopped. Up to 99 cue points can be set (stored).
Pressing the [MARK CUE] key sets a cue point at the current position.
The least number unused for the existing cue numbers is assigned to the cue
number automatically.
<About default cue name>
A default cue name (from among Mark01 through Mark99) is given to a cue point you
set at the desired position. You can edit the default cue name using the "Rename" menu
item on the Cue menu in the MENU mode. See "Editing a cue name" on page 64.
Cue points stored can be used for the locate and skip functions.
From the Cue menu in the MENU mode, the following functions regarding cue
points are available.
* Editing a cue name
* Editing a cue position
* Locating to a cue point
* Deleting a cue point
See "MENU mode" from page 63 for details about cue name editing, cue position
editing and cue point deletion. See "Locate/skip functions" on page 59 for details
about cue point location.
56

Setting cue points

SP/HP
MONITOR FR-2 FIELD MEMORY RECORDER
OFF MAX
PHONES
REC STBY
MENU
/ENTER
SHIFT
HOME /
HOLD RESET CUE
ACCESS
PREV. NEXT
FILE
CARD
RELEASE
LIGHT MARK CUE
L
CONTRAST DEL CUE
[MARK CUE] key
REC
5
4 6
3 7
2 8
PEAK 1 9
R
0 10