Troubleshooting - Singer TYPHOON HVC-1480WD Instruction Manual

TROUBLESHOOTING

Problem
The appliance does not
work
The charging light does
not go on
The vacuum cleaner
does not vacuum
properly
Dust escapes from the
vacuum cleaner
The vacuum cleaner
does not work properly
when one of
accessories is attached
to the nozzle.
Solution
The batteries may be low. Recharge the batteries.
You may not have put the adaptor properly in the
wall socket. Put the adaptor properly in the wall
socket.
The appliance may have been switched on while
it was on the charger. Make sure the appliance is
switched off when you charge it.
Make sure that the adaptor is inserted properly in
the wall socket and that the appliance is switched
off.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
The dust compartment may be full. Empty the dust
compartment.
The fi lter unit may be clogged. Clean the inner fi lter
and the outer fi lter (See the chapter "Cleaning")
The dust compartment may be full. Empty the dust
compartment.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
Perhaps the fi lter unit is not placed properly in the
dust compartment. Place the fi lter unit properly in
the dust compartment.
The dust compartment may be full. Empty the dust
compartment.
The accessory may be clogged. Remove the
the
obstruction from the accessory.
The fi lter unit may be clogged. Clean the inner fi lter
and the outer fi lter (See the chapter "Cleaning")
12
ENGLISH