Picture Adjustment; Picture Position And Screen Adjustment - Fisher PLV-Z4 Owner's Manual

Picture Adjustment

Picture Position and Screen Adjustment

Some input source employ special signal formats which may not be tuned by the auto-tuning system of this projector.
Picture Adjustment enables you to precisely adjust several parameters manually to match those signal formats. The
parameters manually adjusted will be stored for every input.
1 Select the Picture adj. Menu with the Point
press the Point
items.
2 Use the Point
press the Point
The adjustment bar will be displayed.
3 Use the Point
press the OK button.
Overscan
Use the Point 7 8 buttons to adjust the overscan area. It works
only to decrease the overscanned portion of the screen.
(From 0 to +10.)
Horizontal
Use the Point 7 8 buttons to adjust the horizontal picture position.
(From -100 to +100.)
Vertical
Use the Point 7 8 buttons to adjust the vertical picture position.
(From -100 to +100.)
Auto adj.
When the input signal is from a computer, select Auto adj. Press
the Point 8 or OK buttons and it automatically adjust Fine sync.
Total dots, Horizontal and Vertical positions to conform to your
computer.
Fine sync
Eliminate a flicker from the image displayed. Use the Point
buttons to adjust the value. (From 0 to +31.)
Total dots
Adjusts the number of total dots in one horizontal period. Use the
Point 7 8 buttons to adjust the number to match your PC image.
(From -100 to +100.)
✔
Note:
• Overscan can be selected with the video input only.
• The adjusting range for the Horizontal and Vertical positions and Total dots differs
depending on the input signal. When the video signal format is 480i or 575i, the
adjusting range for the Horizontal position will be from -8 to +8.
• The Auto adj. function cannot be operated with the video input, some incompatible
computer input and digital signals.
• Fine sync and Total dots cannot be operated when the video signal format is 480i or
575i and with some incompatible computer input and digital signals.
• The Picture adj. Menu cannot be operated without an input signal.
32
or OK buttons to access the sub-menu
8
ed buttons to select the desired item and
or OK buttons to access the selected item.
8
7 8 buttons to adjust the setting values and
ed buttons and
Picture adj. Menu
7 8
The selected item.
Press the Point 8 or OK
buttons to access the
selected item. The adjust-
ment bar will be displayed.
Use the Point 7 8 buttons
to adjust the the setting
values and press the OK
button to return to the sub-
menu.
If you press the Point d
button, the next item can
be selected.