Table of Contents
Advertisement
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display desirable image size.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
2
Press POINT UP/DOWN button and move a red frame pointer to
function that you want to select and then press SELECT button.
Normal
Provides image to fit screen size.
True
Wide
Digital zoom +
When Digital zoom + is selected, ON-SCREEN MENU disappears
and message "D. Zoom +" is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan image. Panning function can work only when image
is larger than screen size.
A projected image can be also expanded by pressing D.ZOOM L
button on Remote Control Unit.
When Digital zoom – is selected, ON-SCREEN MENU disappears
and message "D. Zoom –" is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM reW nBT/F7 1 Tf9 0 0 9 359.9998 472.454 Tm/Cs9 cs 0 0 0 1 scn/
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
L/M, SELECT, POINT and LASER buttons.
COMPUTER INPUT
SCREEN MENU
NOTE
G True and Digital zoom +/– cannot be operated
when "480i", "575i", "480p", "575p", "1035i (HDTV)"
or "1080i (HDTV)" is selected on PC SYSTEM
Menu (P24).
G Wide cannot be selected when "720p (HDTV)",
"1035i (HDTV)" or "1080i (HDTV)" is selected on
PC SYSTEM Menu (P24).
G This projector cannot display any resolution higher
than 1280 X 1024. If your computer's screen
resolution is higher than 1280 X 1024, reset
resolution to lower before connecting projector.
G Image data in other than XGA (1024 x 768) is
modified to fit screen size in initial mode.
G Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.
29
Advertisement
Table of Contents
