Table of Contents
Advertisement
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.8" full color TFT LCD monitor to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the
button to turn the power on.
The status LED lights green and the camera is initiated.
If the power is turned on in [
is ready for shooting. In both modes, if the camera mode is changed to [
lens barrel will retract into the camera body after 30 seconds.
2. Press the
button to [
3. Compose your image in the LCD monitor.
Slide the zoom lever to
subject on the LCD monitor.
Slide the zoom lever to
angle image.
4. Press the shutter button.
Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure, and pressing the shutter button
down fully captures the images.
The focus area frame turns green when
the camera is in focus and the exposure is
calculated.
When the focus or exposure is not
suitable, the frame of the focus area turns
red.
] or [
] mode, the lens will extend forward and it
].
side to zoom in on the subject, and enlarges the
side to zoom out on the subject, and provides a wider
a
b
], the
EN-19
Hide quick links:
Advertisement
Table of Contents
