Initial Settings; Setting The Date And Time - Sanyo VPC-T850 Instruction Manual

Initial Settings

Setting the Date and Time

The date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the button to [
2. Press the button.
3. Select [Setup] with the
4. Select [Date/Time] with the
press the button.
5. Select the date format with the
and press the
Select the item's field with the
and adjust the value for the date and time
with the /
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the button.
6. To exit from the [Setup] menu, press the
button.
] or [ ].
button.
/ buttons, and
/
button.
/
buttons.
buttons,
buttons
EN-17