Initial Settings - Sanyo VPC-W800 User Manual

Initial Settings

Setting the Date and Time
The date/time needs to be set if/when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these steps to set the
correct date and time.
1. Slide the mode switch to [
2. Press the MENU button and select [Setup] menu with the
3. Select [Date/Time] with the
button.
4. Select the item's field with the
for the date and time with the
The time is displayed in 24-hour format.
5. After confirming all settings are correct, press the SET button.
EN-18
] or [ ].
/ buttons and press the SET
/ buttons and adjust the value
/ buttons.
button.
Capture
Date/Time
01
SET:Adj.
/ 11 / 2007
20 : 00
SET:Enter SET:Enter