Features & Controls; Control Functions - Ferris HydroWalk DDSKAV15 Operator's Manual

Features & Controls
Please take a moment and familiarize your-
self with the name, location, and function ofthese controls so that you will better under-stand the safety and operating ins

CONTROL FUNCTIONS

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in specific sequences. To learn what combination and
sequence of controls to use for various tasks see the OPERATION section.
Forward Speed Control Lever
Reverse Speed Control Levers
These levers control the ground speed of the mower.
The forward lever control the forward ground speed of
both drive wheels.
The left reverse lever controls the steering and reverse
ground speed of the left drive wheel and the rightreverse lever controls the steering and reverse groundspeed of the right drive whe
tral position the faster the drive wheel will turn.
NOTE: The further a lever is moved away from the neu-
See the Operation section for steering instructions.
Ignition Switch The ignition switch starts and stops th
three positions:
OFF Stops the engine and shuts off the
electrical system.
RUN Allows the engine to run and powers t
electrical system.
tion with the engine stopped–this drains the ba
START Cranks the engine for starting.NOTE:
8