Table of Contents
Advertisement
INSTALLATION
Installation of the water inlet hose
1. Check the tap mouth. If it is not even, it can be filed even.
2. Screw loose the locking ring, but do not let the locking ring drop off. Screw the four screws at the same
distance.
3. Put the universal connector into the tap and stick to the tap mouth at the most and then screw in the screws.
4. Screw tight the locking ring to the right.
5. Pull the skirt of one end of the water inlet hose downwards, and then plug in the universal connector. A sound of
"
KA-TA" means proper connection.
6. Grasp the water inlet hose by hand and pull it downward to see whether it is secured
7. Screw the nut on the other end of the water inlet hose into the water inlet of the washing machine to the most.
Tap
File
If the calibre of the tap
is big, the connecting
ring can be taken off.
Skirt
Notices:
After installation, do not start the washing machine in haste. First open the tap to let the water press into
the water inlet hose to check whether there is any leakage in the connectors on the both ends. Sometimes it is
difficult to fix the water inlet hose due to the problem of the tap, you can ask an experienced man for help or
contact the local customer service department. When the pressure is too high, please shut the tap a little to avoid
water leakage.
Locking ring
Connecting ring
INSTALLATION
Installation of the drain hose
Nip the fixing ring with hand to make it loose and engaged on the drain hose and put the drain hose into the
leading skirt of drain hose in the bottom of the washing machine to the end at the most (soak the head of the drain
hose in warm water, it will make the engagement easy), and loose the fixing ring to let it clasp the drain hose.
It had better put the outlet of the drain hose into the
nearby drainage permanently, which can save the trouble
that the drain hose has to be connected each time before
use. If the drainage is far from the washing machine, it
can be solved by connection of the drain hoses head with
end to extend.
Notices:
drain faults will be caused when the drain hose is blocked or after the extension of the hose, it is above the
water outlet.
Cabinet
Inner hose
Fixing ring
Drain hose
Leading ring
14
Advertisement
Table of Contents
