Names Of Parts; Volume Of Washing And Detergent - Philco GJW55P User Manual

Table of Contents

Advertisement

NAMES OF PARTS

1
2
3
4
5
6
1. Top lid
2. Washing tub
3. Gradienter
7. Operation panel
8. Pulsator
9. Drain hose
Accessories
Universal connector
Drain hose (1)
9
8
7
4. Top frame
5. lint filter
6. Adjustable foot
Base cover (1)
Self-tapping screw (1)
Water inlet hose assembly(1)
3
VOLUME OF WASHINGS AND DETERGENT
1. Check
Whether the drain hose
is through
Whether the tap is open
Whether the power
socket is plugged in
Take out the coins and
other sundries from the
pockets and shake off
the mud or sand on the
clothes
3. Determine water level, move the knob and align the dot to the selected water level
5
6
3
4
1
2
Water level
4. Cover the lid and press the power switch
After power on, all lights flash, and buzzer, showing
washing machine on and at default setting, normal
program; 6 water level, wash 12 minutes, rinse 2 times
and spin for 5 minutes.
Start
Power
Pause
2. Washing put in and detergent
Dosage of common low foam washing powder
Dosage of the
Washing Capacity
washing powder
3.6-6.0kg
80g
2.5-3.6kg
70g
1.5-2.5kg
60g
<1.5kg
50g
Low foam and medium foam washing powder are
recommended, and the washing powder had better
be dissolved by warm water and be poured into the
tub.
Please refer to the manual of the washing powder
about the dosage.
Washing capacity and comparison with the water level
Washing capacity
Water level
Water volume
4.5-6.0kg
About 52L
3.5-4.5kg
About 45L
3.0-3.5kg
About 38L
About 32L
2.5-3.0kg
1.5-2.5kg
About 25L
<1.5kg
About 19L
During washing, you can press the button to change
water level in any time.
Notice: when the volume of the clothes is small, the
water level can't be too high, otherwise it will waste
the washing powder and water will splash out.
5. Press "Start/ Pause"button, start the washing machine
The 1-4 steps of the full process program and self-
programming processes are the same, and as for the
use from step 5, please see page 7~12 for details.
Notices:
The washing machine
Start
starts after pressing
Pause
"Start/Pause"button,
and pauses when press
again.
4

Advertisement

Table of Contents
loading

Table of Contents