Dell EMC VEP4600 Installation Manual page 21

4. Select the appropriate number of your choice to upgrade the firmware.
Enter your choice:3
updating BIOS image
******************************
* BIOS version = 3.41.0.9-18 *
******************************
updating primary image only..
BIOS image is ./VEP4600-BIOS-3.41.0.9-19.BIN
00
INFO: Yafu INI Configuration File not found... Default options will not be applied...
Creating IPMI session via network with address xxx.xx.xx.xx...Done
-------------------------------------------------
YAFUFlash - Firmware Upgrade Utility (Version 4.117.7)
-------------------------------------------------
(C)Copyright 2016, American Megatrends Inc.
Beginning BIOS Update...
Upgrading Firmware Image : 0%
Upgrading Firmware Image : 1%
.
Upgrading Firmware Image : 99%
Uploading Image : 100%... done
Flashing Firmware Image : 0%
Flashing Firmware Image : 1%
.
Flashing Firmware Image : 99%
Flashing Firmware Image : 100%
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 0%
Verifying Firmware Image : 1%
.
Verifying Firmware Image : 99%
Verifying Firmware Image : 100%
Verifying Firmware Image : 100%... done
Done with updating primary image
Reseting BMC after updating BIOS
Sending reset to BMC to recover, should wait for 180 seconds
-
/
|
\
-
/
|
\ Will continue to update rest of components
Reseting CPU
Chassis Power Control: Cycle
-
/
|
\
Package version: 3.3
Packaged images:
BMC image:
BIOS image: 3.41.0.9-19
CPLD image: 0x12
Wifi CPLD image: 0x1
X722 image: 5.00
Note:If BMC version is less than 1.23 CPLD versions will not be shown correctly
1. Automatically update all firmware components
2.20
Upgrade firmware through BMC 21