Dell EMC VEP4600 Installation Manual page 15

2. BMC image[Primary version:2.20, backup version:2.0]
3. BIOS image[Booted version:3.41.0.9-18]
4. CPLD image[CPLD version:v10 (0x10)]
5. rNDC left CPLD image[CPLD version:0x02]
6. rNDC right CPLD image[CPLD version:0x02]
7. intel rNDC firmware update:
[ left Type: NA, (0.0)]
[ right Type: X710, (0.DUP package – 19.05.12)]
Note: also need to update i40e driver to 2.10.19.82 and DPDK to
8. intel X722 firmware[X722 firmware version:3.33]
Note: also need to update i40e driver to 2.10.19.82 and DPDK to
9. Reset BMC after CPLD update completion and system bootup
q. Exit
Enter your choice:q
4. After firmware upgrade completes, enter q to exit.
5. Once all firmware updates are complete, a system power cycle is required either with remote power cycler or manually
unplugging and plugging back the power cord.
NOTE: Please note that the power down state should be minimum of 15 seconds for the complete power drain.
or further version
or further version
Upgrade firmware through DiagOS 15