Honda GXR120T Manual page 37

dummyhead dummyhead
WIRING DIAGRAM
HOW TO READ A WIRING DIAGRAM & RELATED INFORMATION
WIRING DIAGRAM
The wiring diagram, connector general layout drawing, connector drawings, and the symbols used in troubleshooting are explained
in this section.
HOW TO READ CONNECTOR DRAWINGS
Connector drawings show the terminal arrangement, terminal No., number of pins, and the shape of terminal (male or female).
Both the male and female connectors are shown for the common connectors, while only the main wire harness side connectors are
shown for the dedicated connectors.
The double frame connectors represent the male connectors and the single frame connectors represent the female connectors.
Both the male and female connectors are shown by viewing them from the terminal side.
TERMINAL ARRANGEMENT
The connector drawing shows the terminal arrangement of
the connector with the lock of the connector toward up.
MALE CONNECTOR DRAWING
(DOUBLE FRAME)
Male connector viewed from the
terminal side.
15-2
FEMALE CONNECTOR
VIEWING DIRECTION
CONNECTOR No.
VIEWING DIRECTION
LOCK
MALE CONNECTOR
CONNECTOR No.
FEMALE CONNECTOR DRAWING
(SINGLE FRAME)
Female connector viewed from the
terminal side.
LOCK
TERMINAL No.
The system drawing shows the No.9 terminal of the connector.