Toshiba SD-2550A Service Manual page 53

2. REPLACEMENT OF MECHANICAL PARTS (TYPE B)
2-1. Cabinet Replacement
2-1-1. Top Cover
1. Remove seven screws (1) and remove the top cover (2).
Top cover (2)
Screw (1)
Fig. 2-1-11
2-1-2. Clamper Stay
<Removal>
1. Remove two screws (1).
2. Release two claws and remove the clamper stay (2).
Screws (1)
Clamper
stay (2)
Claw
A
Spring
Claws
Fig. 2-1-12
Screws (1)
Screw (1)
Clamper stay (2)
Clamper stay (2)
Claw
<Mounting >
1. The spring for tray side pressure is inserted into the
portion "A". (Refer to Fig. 2-1-12.)
2. By referring to Fig. 2-1-13, insert the spring normally
and mount the clamper stay.
This part should be touched
to the left side of the tray.
OK
Mechanism
chassis assembly
Press down by finger
unitil fix the clamper assembly
No floating
2-5
NG
NG
Tray
Spring
OK
Floating NG
Fig. 2-1-13
NG