Table of Contents
Advertisement
110
RDS 1
RDS is a broadcasting service which allows stations to
send additional information along with the regular radio
programme signal.
RDS works on the FM waveband in Europe only.
1
Select TUNER by turning the FUNCTION knob (or
press the TUNER button of the remote control unit).
2
Select FM by pressing the BAND button.
3
Tune in a station.
4
Every time the RDS button is pressed, the mode is
changed as follows:
PS (Programme Service Name)
When you select PS, "PS" will blink for about 4
seconds and then PS or a station name will be
displayed. If there is no PS data, the frequency will
be displayed.
CT (Clock Time)
displays the information about times provided from
the station.
When you select CT, "CT" will blink for about 4
seconds and then the clock time will be displayed.
PTY (Programme Type)
When you select PTY, "PTY" will blink for about 4
seconds and then the type of received PTY will be
displayed.
RT (Radio Text)
Displays the news of stations composed of up to 64
symbols.
< When you select RT, "RT" will blink for about 4
seconds and then the data of received RT will be
displayed.
TA (Traffic Announcement)
When you select TA, "TA" will blink for 4 seconds and
then the unit searches for a traffic announcement.
If there is no CT/PTY/RT data, RDS mode will be
switched to PS mode automatically.
ENGLISH
Advertisement
Table of Contents
