Advertisement
: '15/Aug.
1
50-27
Purpose
Adjustment
Function (Purpose) Used to perform the image loss adjustment
of scanned images in the FAX or image
send mode.
Section
Operation/Procedure
1)
Select a target adjustment mode with [FAX] or [SCANNER]
key.
2)
Select an adjustment target item with scroll key on the touch
panel.
3)
Enter the set value with 10-key.
4)
Press [OK] key. (The set value is saved.)
FAX send
A
Image loss
amount setting
B
OC
C
D
Image loss
amount setting
E
SPF SIDE1
F
G
Image loss
amount setting
H
SPF SIDE2
I
When
A
Image loss
image
amount setting
B
send mode
OC
C
(Except for
D
Image loss
FAX and
amount setting
E
copy)
SPF SIDE1
F
G
Image loss
amount setting
H
SPF SIDE2
I
1
A-I: When the adjustment value is increased, the image loss is increased.
1step = 0.1mm
50-28
Purpose
Adjustment
Function (Purpose) Used to automatically adjust the image
loss, void area, image off-center, and image
magnification ratio.
Section
Operation/Procedure
The following adjustment items can be executed automatically with
SIM50-28.
* ADJ 12 Print image position, image magnification ratio, void
area, off-center adjustments (Manual adjustments)
* ADJ 13 Scan image magnification ratio adjustment (Manual
adjustment)
* ADJ 14 Scan image off-center adjustment (Manual adjustment)
* ADJ 15 Used to adjust the copy image position and the image
loss (Manual adjustments)
1)
Select an adjustment item with the menu button.
2)
Press [EXECUTE] key, and the adjustment pattern is printed.
3)
Set the adjustment pattern on the document table.
4)
Press [EXECUTE] key, and the adjustment pattern is scanned.
5)
Press [OK] key.
Item/Display
OC ADJ
MFT
Document lead edge
Document off-center
CS1
Sub scanning magnification ratio
CS2
Item/Display
LEAD_EDGE (OC)
FRONT_REAR (OC)
TRAIL_EDGE (OC)
LEAD_EDGE (SPF_SIDE1)
FRONT_REAR (SPF_SIDE1)
TRAIL_EDGE (SPF_SIDE1)
LEAD_EDGE (SPF_SIDE2)
FRONT_REAR (SPF_SIDE2)
TRAIL_EDGE (SPF_SIDE2)
LEAD_EDGE (OC)
FRONT_REAR(OC)
TRAIL_EDGE(OC)
LEAD_EDGE (SPF_SIDE1)
FRONT_REAR (SPF_SIDE1)
TRAIL_EDGE(SPF_SIDE1)
LEAD_EDGE (SPF_SIDE2)
FRONT_REAR (SPF_SIDE2)
TRAIL_EDGE(SPF_SIDE2)
Content
MX-M316N SIMULATION 6 – 60
Content
OC lead edge image loss amount setting
OC side image loss amount setting
OC rear edge image loss amount setting
Front surface lead edge image loss amount setting
Front surface side image loss amount setting
Front surface rear edge image loss amount setting
Back surface lead edge image loss amount setting
Back surface side image loss amount setting
Back surface rear edge image loss amount setting
OC lead edge image loss amount setting
OC side image loss amount setting
OC rear edge image loss amount setting
Front surface lead edge image loss amount setting
Front surface side image loss amount setting
Front surface rear edge image loss amount setting
Back surface lead edge image loss amount setting
Back surface side image loss amount setting
Back surface rear edge image loss amount setting
Item/Display
SPF ADJ
ALL
(RSPF)
Item/Display
SETUP/
ALL
PRINT
ADJ
Section
Scanner
Setting range
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
Content
SIDE1
MFT
Document lead edge
(Front
surface)
Document off-center
SIDE2
CS1
Sub scanning
(Back
magnification ratio
surface)
CS2
MFT
CS1
CS2
Content
LEAD
MFT
Print off center
CS1
Print lead edge
CS2
ADU
CS3
CS4
OFF
MFT
SET
CS1
CS2
ADU
CS3
Default value
30 (3mm)
20 (2mm)
20 (2mm)
20 (2mm)
20 (2mm)
30 (3mm)
20 (2mm)
20 (2mm)
30 (3mm)
0 (0mm)
0 (0mm)
0 (0mm)
0 (0mm)
0 (0mm)
0 (0mm)
0 (0mm)
0 (0mm)
0 (0mm)
Section
Scanner
Section
Engine
Advertisement
