Transmission And Front Gearcase; Specification Chart; Transmission Lubrication - Polaris RANGER XP 900 2013 Manual

MAINTENANCE

TRANSMISSION AND FRONT GEARCASE

SPECIFICATION CHART

GEARCASE
Transmission
Front Gearcase

TRANSMISSION LUBRICATION

It is important to follow the transmission maintenance
intervals described in the Periodic Maintenance Chart.
The transmission lubricant level should be checked and
changed in accordance with the maintenance schedule.
• Be sure vehicle is positioned on a level surface when
checking or changing the lubricant.
• Check vent hose to be sure it is routed properly and
unobstructed.
Transmission Lubricant Level Check
The fill plug is located on the rear portion of the
transmission gearcase. Access the fill plug at the rear of
the vehicle. Maintain lubricant level even with the bottom
of the fill plug hole.
1. Position vehicle on a level surface.
2. Remove the fill plug and check the lubricant level.
3. If lubricant level is not even with bottom threads, add
recommended lubricant as needed. Do not overfill.
2.24
LUBRICANT
AGL Gearcase Lubricant
Demand Drive Fluid
NOTE
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
CAPACITY
41 oz. (1200 ml)
6.75 oz. (200 ml)
4. Reinstall the fill plug and torque to specification.
TORQUE
Fill / Drain Plug:10-14 ft-lbs (14-19 Nm)
Transmission Lubricant Change
The drain plug is located on the bottom of the
transmission gearcase. Access the drain plug
through the drain hole in the skid plate.
5. Remove the fill plug (refer to "Transmission Lubricant
Level Check").
6. Place a drain pan under the transmission drain plug.
7. Remove drain plug and allow lubricant to drain
completely.
8. Clean the drain plug magnetic surface.
9. Reinstall drain plug with a new O-ring and torque to
specification.
FILL / DRAIN PLUG
TORQUE
10-14 ft-lbs. (14-19 Nm)
8-10 ft-lbs. (11-14 Nm)
© Copyright Polaris Sales Inc.