Front Panel; Chapter Three; Remote Control - Extron electronics FOX 4G Matrix 14400 Setup Manual

Installation, cont'd

Front Panel

CONFIG POWER SUPPLY
PRIMARY
REDUNDANT
7 8
Figure 2-7 — Front panel configuration port
g
Configuration port —
or computer to the front panel Configuration (RS-232) port.
Use an optional 9-pin D to 2.5 mm mini jack TRS RS-232
cable, part #70-335-01.
h
Primary and Redundant Power Supply LEDs —
Green — Indicates that the associated power supply is
operating within normal tolerances.
Red — Indicates that the associated power supply is operating
outside the normal tolerances or has failed. See chapter 4,
"Maintenance and Modifications", to replace the power supply.
2-6 FOX 4G Matrix 14400 • Installation
Refer also to the FOX 4G Matrix 14400 User's Manual at www.extron.com.
FOX 4G MATRIX 14400
FIBER OPTIC DIGITAL MATRIX SWITCHER
If desired, connect a control system
FOX 4G Matrix 14400

Chapter Three

Installing and Starting the Control Program
3

Remote Control

Selected SIS Commands
Accessing the HTML Pages