Charge The Unit - Singer HVC-720 MOVE Instruction Manual

type and is appropriate to the weight of the appliance.
• Mark the location of the screw holes (within reach of an electrical outlet for
charging the vac while it is on the wall bracket).
• Fix the mounting bracket to the wall using appropriate screws and plugs for
the type of wall and weight of the appliance.
• Hang the appliance on the wall by placing the opening on the base of the
vac over the hooks in the wall mount charging bracket.
Table placement
The appliance can also be placed on a horizontal, fl at, stable surface (table,
desk).

CHARGE THE UNIT

1. Put the unit on the charger base (Fig. 4).
2. Insert the unit into the charger seat.
3. Plug the charger into the socket: it will be charged.
When unit is fully charged, the electric circuit control will stop charging
automatically.
4. The charging light shows red to indicate that the appliance is in procedure
charging (Fig. 5)
Note: When the charging light turns to green, it means the appliance is fully
charged.
Fig.2
Fig.3
9
ENGLISH