Starting And Stopping; The Vehicle - GMC LYRIQ 2023 Owner's Manual

208 Driving and Operating
If the vehicle cannot be pulled
over, and must be shut off
while driving, press and hold
POWER for longer than
two seconds, or press twice in
five seconds.

Starting and Stopping

the Vehicle

Starting Procedure
Press the P (Park) button on
the shift lever, or move the
shift lever into N (Neutral). The
propulsion system will not
start in any other position.
Caution
Do not try to shift to P (Park)
if the vehicle is moving or
the electric drive unit could
be damaged. Shift to
P (Park) only when the
vehicle is stopped.
Caution
If you add electrical parts or
accessories, you could
change the way the vehicle
operates. Any resulting
damage would not be
covered by the vehicle
warranty.
The Remote Key must be in
the vehicle. Press the brake
pedal, then press and release
POWER .
If the Remote Key is not in the
vehicle or something is
interfering with the Remote
Key, a message displays in the
Driver Information
Center (DIC).
If the vehicle will not start due
to a low Remote Key battery,
the vehicle can still be driven.
See Remote Key Operation
0 8.
A vehicle ready light displays
in the lower right corner of the
instrument cluster when the
vehicle is ready to be driven.
The instrument cluster also
displays an active battery
gauge when the vehicle is
ready to be driven.
Restarting Procedure
If the vehicle must be
restarted while it is still
moving, move the shift lever to
N (Neutral) and press
POWER twice without
pressing the brake pedal. The
propulsion system will not
restart in any other position.
A chime will sound if the driver
door is opened while the
vehicle is on. Always press
POWER to turn the vehicle
off before exiting.