Chevrolet Tahoe 2022 Owner's Manual page 283

282 Driving and Operating
Hitch Cover
To remove hitch cover, if equipped:
1. Remove the two fasteners on the lower
tabs (2).
2. Pull the lower edge of the cover to
about a 45 degree angle.
3. Pull the cover upward to disengage the
upper attachments (1).
To reinstall hitch cover:
1. Hold cover at a 45 degree angle to the
vehicle and push the upper tabs into the
slots in the bumper.
2. Push the bottom of the cover forward
until the lower tabs line up with the
lower slots.
3. Snap the hitch cover into place by
pushing the upper corners forward (1).
4. Reinstall the two fasteners on the lower
tabs (2).
Consider using mechanical sway controls
with any trailer. Ask a trailering professional
about sway controls or refer to the trailer
manufacturer's recommendations and
instructions.
Weight-Distributing Hitch and
Adjustment
A weight-distributing hitch may be useful
with some trailers. Use the following
guidelines to determine if a
weight-distributing hitch should be used.