Chevrolet Tahoe 2022 Owner's Manual page 166

Use direct commands without a lot of
extra words. For example, Call <name>
at work, Play followed by the artist or
song name, or Tune followed by the
radio station number.
Direct commands are more clearly
understood by the system. An example of a
direct command is Dial <number> .
If a cell phone number was saved with a
name and a place, the direct command
should include both. For example Call
<name> at work.
Voice Recognition for the Radio
If browsing the audio sources when voice is
touched, the voice recognition commands
for AM, FM, and SiriusXM (if equipped) are
available.
Tune to <AM frequency> AM : Tune to
the radio station frequency identified in the
command (like nine fifty ).
Tune to <FM frequency> FM : Tune to the
radio station frequency identified in the
command (like one oh one point one ).
Play channel <SXM channel number> on
SiriusXM : Tune to the SiriusXM radio
station channel number identified in the
command.
Play <SXM channel name> on Sirius XM :
Tune to the SiriusXM radio station channel
name identified in the command.
Voice Recognition for the Phone
Make sure the phone is paired using
Bluetooth to use the phone related voice
commands.
Call <contact name> : Initiate a call to a
stored contact. The command may include
location if the contact has location numbers
stored.
Call <contact> At Home, At Work,
Mobile, or On Other : Initiate a call to a
stored contact and location at home, at
work, on mobile device, or on another
phone.
Call <cell phone number> : Initiate a call
to a cell phone number of seven digits, 10
digits, or three digit emergency numbers.
Redial : Initiate a call to the last dialed
number.
Voice Recognition for Navigation
Navigation commands can be used to start,
cancel route, or add way points/POI.
Infotainment System
Navigate to <destination address> :
Initiate navigation to the address in the
command.
Add <destination> on my way : Adds a
way-point to the current route.
Take me home : Starts navigation to
Home location set in Google maps.
Onboard Vehicle Commands
These commands can be used to adjust
vehicle temperature, control window
defrosters and obtain fuel information.
On
Turn on the A/C : Turns on the air
conditioning.
How much gas do I have left : Find out
how much fuel your vehicle has left.
Set temperature to <desired number>
degrees : Set to a specific temperature
inside your vehicle.
Phone Assistant Voice Recognition
Press and hold on the steering wheel
controls to pass through and launch Google
assistant on the phone or Siri.
165