Install Upper Dashboard Tray
1. Install screws securing bar backing plate to front crossbar using a Phillips screwdriver.
2. Install screws securing upper dashboard tray to front crossbar using a Phillips screwdriver.
NOTE: Be careful not to over tighten screws. Over tightening can damage the plastic.
Install Console
1. Install screws securing console to upper dashboard tray using a Phillips screwdriver.
2. Connect cables.
Item
1
2
Screw, #10 x 0.5" Phillips Head (black)
Item
1
2
Screw, M4.2 x 19mm Phillips Head
Item
1
2
Screw, M5 x 25mm Phillips Head
Page 17 of 23
Description
Ergo™ Bar Backing Plate
Description
Upper Dashboard Tray
Description
Console
Qty
2
2
Qty
1
2
Qty
1
4