Table of Contents
Advertisement
Install Uprights
1. Place uprights on base assembly.
2. Install one bolt, washer, and lock nut to left and right upright and base assembly using a 9/16" socket and wrench.
NOTE: Leave a spacing of 5-12mm between washer and upright.
3. Align uprights with holes in base assembly.
4. Install bolts, washers, and lock nuts securing uprights to base assembly using a 9/16" socket and wrench.
Item
1
2
3
4
5
Item
1
2
3
Page 12 of 23
Description
Left Upright
Right Upright
Bolt, 3/8 x 5" Hex Head
Washer, 3/8" Flat
Lock Nut, 3/8"
Description
Bolt, 3/8 x 5" Hex Head
Washer, 3/8" Flat
Lock Nut, 3/8"
Qty
1
1
2
2
2
Qty
6
6
4
Advertisement
Table of Contents
