Download Print this page

Bissell BIG GREEN 48F3G User Manual page 7

Advertisement

Operations
Cleaning with Attachments
Your cleaning machine comes with a hose and at least
one attachment for cleaning stairs, upholstery and more.
1. Important! If using to clean upholstery,
check upholstery tags.
a. Check manufacturer's tag before cleaning.
Do not use on velvet or silk. If manufacturer's
tag is missing or not coded, check with your
furniture dealer.
b. Check for colourfastness in an
inconspicuous place.
c. Check upholstery stuffing. Coloured
stuffing may bleed through fabric when wet.
d. Plan to allow upholstery time to dry.
e. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum with a
brush attachment and a crevice tool to clean
in fabric folds.
2. Remove Dirty Water Tank. Pull Dirty Water
Tank handle to upright position and lift up to
remove Dirty Water Tank.
3. Lift Clean Water Tank from the base of
machine.
a. Unscrew cap on top of the Clean Water
Tank. Fill tank to FILL line with clean, warm
tap water (60°C/140°F MAX).
Do not boil or microwave water.
b. Measure BISSELL® formula using cap on
tank. Fill cap to line twice for each full tank
of water. Always use genuine BISSELL
formulas to maximize cleaning and for the
safety of your machine.
c. Screw cap back onto Clean Water Tank
and place tank onto base of the machine.
4. Attach Hose.
a. Connect solution hose to the hose
connection point on machine, next to
Flow Indicator. Insert hose and turn
clockwise until locked into place.
b. Open Hose Latch on the front of the
machine and insert hose into place.
Turn clockwise until locked into place.
5. Attach cleaning tool to the end of the hose.
6. Clean by pressing the red trigger to spray
solution onto the area to be cleaned. Slowly
move the tool back and forth over the soiled
surface. Release the trigger to suction soiled
water. Continue to clean in the area, working
in small sections, until no more dirt can be
removed. Caution: Do not overwet.
7. Plug into a proper outlet and turn the
Power Switch to the ON ( I ) position.
8. Remove and rinse tool in clean running water.
Let dry completely.
9. Empty Dirty and Clean Water Tanks and
rinse following instructions on "Machine Care"
Instructions on page 8.
WARNING
To reduce the risk of injury, be extra careful when cleaning
stairs. Make sure machine is secure and level.
Manufacturer's tag
2.
3.
3c.
4b.
5.
3a.
4a.
4b.
6.
BISSELL.com
7

Advertisement

loading

This manual is also suitable for:

Big green 64p8f