Troubleshooting; Self-Test - Dell P2223HC User Manual

Troubleshooting

WARNING: Before you begin any of the procedures in this section,
follow the Safety

Self-test

Your monitor provides a self-test feature that allows you to check whether your
monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by
performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the computer.
3. Turn on the monitor.
If the monitor cannot sense a video signal and is working correctly, the following
message will appear:
NOTE: The message may be slightly different according to the
connected input signal.
NOTE: While in self-test mode, the power LED remains white.
4. This box also appears during normal system operation, if the video cable
becomes disconnected or damaged.
5. Turn Off your monitor and reconnect the video cable; then turn On both your
computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check
your video controller and computer, because your monitor is functioning properly.
│
72 Troubleshooting
instructions.