Removing The Monitor Stand; Vesa Wall Mounting (Optional) - Dell P2223HC User Manual

Removing the monitor stand

NOTE: To prevent scratches on the LCD screen when removing the
stand, ensure that the monitor is placed on a soft surface and handle it
carefully.
NOTE: The following steps are specifically for removing the stand that
is shipped with your monitor. If you are removing a stand that you
purchased from any other source, follow the setup instructions that are
included with the stand.
To remove the stand:
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand release button at the back of the display.
3. Lift the stand up and away from the monitor.

VESA wall mounting (optional)

(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable flat table.
2. Remove the stand. (See
3. Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
│
46 Setting up the monitor
Removing the monitor stand)