Epson EMP-70 Instruction Manual page 64

•
Disturbed image
•
Noisy
Image Disappears or is Undersized
•
Image Disappears
•
Undersized
62
• Are cables connected correctly? See pages 24, 25
• Is the correct resolution selected? See page 23
Set your computer to provide a signal compatible with
the projector. Consult your computer instruction manual
with regard to modifying the signal.
• Press the Auto button on the remote control.
See page 34
• Have you adjusted Sync.*, Tracking*, and Position?
See page 47, 74
Use the "Menu" to adjust.
• Are the video signal mode settings correct?
See page 48
Use the Menu > Video > Mode menu items to select a
video signal format. Auto detection according to video
signal input is not always possible.
• Are the computer/component video signal settings
correct? See page 48
Select the correct input signal settings by selecting Menu
> Video > Input Signal.
RGB: Computer images
YUV: Color difference images
YCbCr: DVD images
YPbPr: HDTV images
• Are you using an cable included or one sold
separately? See page 72.
• Are cables too long?
A commercial video signal amplifier should be used with
computer cables longer than 10m (393.70inches) .
• Have you adjusted "Position"? See page 47
Use the Menu > Video > Position menu items to adjust.
• Is the correct resolution selected? See page 23
Set your computer to provide a signal compatible with
the projector. Consult your computer instruction manual
with regard to modifying the signal.
• Change the resolution of your notebook type or
integrated LCD-type computer. See page 31
Change the resolution to provide a full LCD display, or
provide the video signal only to the external output.