Epson EMP-70 Instruction Manual page 28

[Inputting a Component Video Image Signal]
• If using a component video cable
DVD player, etc.
• If using a D terminal cable
DVD player, etc.
Point:
• When projecting a component video image, select "YCbCr" or "YPbPr" in the Video
> Input Signal menu.
Select "YCbCr" if using a DVD player, and select "YPbPr" if using a HDTV video
source.
• To change the aspect ratio of the projected image between 4:3 and 16:9, select Video
> Aspect Ratio menu.
26
To Y terminal (Green)
To Pb or Cb terminal (Blue)
To Pr or Cr terminal (Red)
Component video cable (optional part)
A/V cable (supplied with projector)
To (L) audio terminal (White)
To (R) audio terminal (Red)
To D-terminal
D-terminal cable (optional part)
A/V cable (supplied with projector)
To (L) audio terminal (White)
To (R) audio terminal (Red)
Computer/Component Terminal
R-Audio Terminal (Red)
Computer/Component Terminal
R-Audio Terminal (Red)
L-Audio
Terminal
(White)
L-Audio
Terminal
(White)