Table of Contents
Advertisement
HX7+ ASD Optional Devices
The HX7+ ASD may be equipped with several options which are used to expand the functionality of the
ASD.
Table 28
Item
ASD7-SIM2
ASD-BPC
ASD-CAB-PC
ASD-ISO-1
ASD-TB1-AC1
HS35 Encoder
Note:
Multicom boards are identified as ASD-Multicom-A, -B, -F, etc.
-A
-B
-F
-J
-S
-X
Note:
See the user manual of the applicable option for further information on each item.
234
lists the available options and their functions.
Table 28. HX7+ ASD Optional devices and functions.
Emulates the input control signals of the HX7+ ASD via switches and pots.
Provides dust protection for the HX7+ ASD when the keypad is removed or mounted remotely.
Female 9-pin d-type to RJ-45 (PC to ASD cable).
Provides isolation of the Control Board output circuit from the AM/FM output and from the II
input.
Provides 120 VAC discrete input terminal activation and additional I/O terminals.
Provides rotational speed and/or directional information. The Encoder is mounted on the motor
shaft or the shaft-driven equipment.
Incorporates the Modbus, Profibus, or Device Net communications protocol for system control
and is able to receive and process Vector Control feedback.
Provides a line driver and open collector interface for system control.
The Tosline-F10 interface provides high-speed communication to Toshiba control equipment via
twisted pair wiring.
Able to receive and process vector control feedback via line driver or open collector interface.
The Tosline-S20 interface provides high-speed communication to Toshiba control equipment via
fiber optics.
Provides extended terminal I/O functions for monitoring, feedback, and control.
Device Function
ASD – Multicom Option Board
HX7+ ASD Installation and Operation Manual
ASD-
Multicom
Option Board
Advertisement
Table of Contents
