Preliminary Checs - Quadro 350D Manual

RIDING THE VEHICLE RIDING THE VEHICLE RIDING THE VEHICLE RIDING THE VEHICLE RIDING THE VEHICLE
48
5.1 PRELIMINARY CHECKS 5.1 PRELIMINARY CHECKS 5.1 PRELIMINARY CHECKS 5.1 PRELIMINARY CHECKS 5.1 PRELIMINARY CHECKS
The following checks must always be carried The following checks must always be carried The following checks must always be carried The following checks must always be carried The following checks must always be carried
out before riding the vehicle in order to ensu- - - - - out before riding the vehicle in order to ensu out before riding the vehicle in order to ensu out before riding the vehicle in order to ensu out before riding the vehicle in order to ensu
W A R N I N G W A R N I N G W A R N I N G W A R N I N G W A R N I N G A T T E N T I O N A T T E N T I O N A T T E N T I O N A T T E N T I O N A T T E N T I O N
re it trouble-free operation. Failure to comply with this rule re it trouble-free operation. Failure to comply with this rule re it trouble-free operation. Failure to comply with this rule re it trouble-free operation. Failure to comply with this rule re it trouble-free operation. Failure to comply with this rule
may lead to serious injuries and damage to the vehicle. may lead to serious injuries and damage to the vehicle. may lead to serious injuries and damage to the vehicle. may lead to serious injuries and damage to the vehicle. may lead to serious injuries and damage to the vehicle.
Engine oil
Final drive oil
Water cooled
Fig.01_05 Fig.01_05 Fig.01_05 Fig.01_05 Fig.01_05
Braking system
Throttle control
Lights, warning lights, horn,
turn indicators
Steering wheel
Tyres
Central / side stand
Fuel tank
Tightening elements
Hydraulic Tilting System Hydraulic Tilting System (HTS Hydraulic Tilting System Hydraulic Tilting System
Check the level (pag.58)
Check the level (pag.61)
Check the level (pag.69)
Check that the braking levers do not stick
while operating. Check the front disc brake
oil level (pag. 70), and that there is no
leakage in the circuit. Check the rear drum
brake adjuster tightening (pag. 72).
Check the correct opening/closure
operation during the whole handlebar
rotation
Check the right operation of visual and
acoustic devices
Check that the rotation is homogeneous,
smooth and play-free
Check the tyres right inflation pressure,
wear state, and any possible damage
Check that it operates properly, i.e. the
springs bring it to the rest position
Check the fuel level, any leakage and its
correct closure
Check that the tightening elements are not
slackened
HTS HTS) HTS Ensure that the caps are (see fig. 24_04) and
that there are no leaks within the circuit.